Frequently Asked Questions
and Answers (since the questions won’t do you much good without answers)
Before Purchase
What is the cost per sqft?
Price per sqft is approximately $0.78 (based on 400 sqft) Not including shipping or taxes.
My concrete was just poured. When can I apply the stain?
The concrete has to reach full cure before staining. Generally full cure is reached 30 days after pouring. In some cases curing times may vary. Always ask your concrete contractor for a specific curing time
What temperature should the floor be?
Your concrete must be above freezing (0C/32F) temperature to apply the stain. To ensure the stain has enough reaction time, your concrete should be at a comfortable room temperature. For cases regarding raidient infloor heating please refer to the question below.
I have raidient infloor heating, will the stain work ok with that?
YES! Radiant floors will not interfere with the stain, however the overall temperature of the floor should not be too warm that it causes the stain to dry rapidly. Keeping your floor on the cooler side will ensure the stain has enough time to react.
What products do I need for a finished floor?
In most cases for residential applications you’ll need at least Steps 1-4.
Step1: NeutraClean
Step2: Stain
Step3: NeutraClean
Step4: Sealer
After Step4 (sealer), a very popular way to finish off the floor and add extra depth of colour is to add Step5, a Wax Coat. While this is not an essential step it will add extra protection to your floor and increase the lifespan of your topcoats.
Can the stain be applied during winter?
Absolutely! However please refer to the questions above about concrete temperature to ensure proper application
How many colours are available?
It is available in 10 colours.
Your Title Goes Here
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What finishes are available for the sealer and wax?
Over our line of sealers and waxes we have 3 different finishes available. Matte, Satin, and Gloss.
Is the final finish slippery?
The finishes do not change the texture of your concrete. As with any floor, when it gets wet care should be given to walking on it. When dry the floor will not become slippery due to final coats, but may feel smoother to walk on.
During Install
How do I apply the stain?
The ideal method is using a plastic pump sprayer easily found at your local hardware store. In addition use plastic spray bottle for small applications or small projects. A conical mist will provide the best overall finish and coverage.
Do I mix the stain?
Yes, the stain should be mixed equal parts water to stain to achieve the intended colour. The mixture may be adjusted either way to achieve a more intense or lighter colour depending on your desire. It is ALWAYS recommended to perform a test sample to dial in your mixture.
Can I mix colours?
Typically no. However you can apply two or more colours to your project, by applying them one colour at a time in separate coats. Ideally test a small area to see what marbling effect your concrete will reveal
Do I wash the stain in between stain coats?
No.
How do I wash the stain before applying the sealer?
Your first wash should be done using a mixture of our NeutraClean mixed in clean water, then applied and scrubbed using either a stiff bristle broom or floor machine with scrubbing pad attached. The water must be then vacuumed off the floor using a wet-vac system. Additional cleaning can then be done using only water. Your floor is clean when there is no colour transfer to a white cloth wiped along the floor.
Your Title Goes Here
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
How much does the gallon of stain cover?
This product is mixed 1:1 water to stain and will cover approximately 400 sq. ft. in 2 coats or 800 sq. ft. 1 coat. It is recommended to apply the stain with 2 coats.
Maintenance
When will I have to redo the wax coat?
This depends on how heavy your floor traffic is and your personal preference. Typically once a year for residential applications. Industrial and commercial more often and based upon personal preference.
How do I clean the floor? Do I need any speacial product?
Cleaning your floor is as easy as using a mop & water with our NeutraClean. Although NeutraClean is not necessary to wash your floors, this cleaner is economical, environmentally safe, will not leave any residue and can be used for many other cleaning purposes.
Do I have to recoat the entire floor with wax when the wax coat shows signs of wear?
This depends on which wax is used. In all cases to maintain a smooth and even looking floor a coat of wax should be applied to the entire floor. However if our Easy Shine Mop-on-Wax has been used, spot treatment can be done to areas needing immediate attention. Simple to apply, quick to dry, your floor will be ready for use again in no time!
Your Title Goes Here
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.